I bought a braend new camera from walmart speciffically for LASR. spec are attached. So i get the software installed and running and set the taret, calibrated all good. click start and do some test shots but it only picks up 1 out 8 shots. camera is stable on a tripod. I have to hold the laser steady on the target for it to register. I'm using a microsoft surface for my testing. should i try something else? different camera? Any help would be appreciated.


Tìm link bong88 uy tín? Truy cập ngay để khám phá kho game đỉnh cao từ thể thao, xổ số đến bắn cá. Ưu đãi hấp dẫn dành cho người chơi mới tại bong8885 com.
Tại sao hàng ngàn người chơi đổ về Ok365xn com? Vì chỉ cần vào ok365 xn là có ngay trải nghiệm cá cược đỉnh cao – nạp rút chưa tới 5 phút, thưởng về tài khoản liền tay!
Nhà cái 69vn liên tục nâng cấp trải nghiệm người dùng với giao diện tối ưu và hệ thống game chuẩn quốc tế. Link đăng nhập tại 69vnxn com luôn hoạt động ổn định.
mm live có rất nhiều idol dễ thương, tương tác thật sự vui và thân thiện. Ngoài ra còn tích hợp loạt game cực hay, phù hợp cho anh em giải trí cuối tuần. Mình khuyên mọi người nên ghé thử mmlive co com một lần.
chỉ với vài thao tác đơn giản tại trang chủ 58win, bạn đã có thể tham gia cược mọi thể loại game từ slot, tài xỉu, bắn cá cho đến cá độ thể thao và game bài cực kỳ hấp dẫn.
Interesting setup! From my experience, ensure your laser is consistently hitting the target within the camera's field of view. Also, check the software's sensitivity settings – maybe it's too low? Could your Surface be struggling with processing? Speaking of struggles, this reminds me of the game Drift Boss – it's all about precision and control! Perhaps try a more powerful computer or a dedicated graphics card? Good luck!
Nhà cái s666 đang gây sốt với kho game phong phú và giao diện thân thiện. Truy cập ngay https://s666.sc/ để khám phá không gian giải trí trực tuyến hấp dẫn, bảo mật cao và cơ hội nhận thưởng lớn.
Với hệ thống công nghệ hiện đại, nhà cái ae888 luôn đảm bảo tốc độ truy cập nhanh và ổn định. Để cập nhật link mới mỗi ngày, người chơi chỉ cần truy cập ae888 us com.
Mine is a new installation of LASR Classic. I have a similar issue. I've tried adjusting lighting, detection threshold, target area, a variety of targets, the angle of the camera, the angle of the sight line, and a few more things. Nothing seems to make much difference. I have noticed that shots will be detected on lighter areas of the target where there is no shading but not on dark areas like the bulls eye, or even a gray area.